1. Mix the Murphy’s Oil Soap with water and wash the piece with a rag dampened in the mixture. Be careful not to get the piece too wet — wipe down with a dry rag if there is a lot of water left on the surface. Repeat until rags no longer pick up any grime.
Murphy ® Oil Soap gets deep into grime to break up dirt particles and it’s safe to use on wood products like cabinets. Avoid using any abrasive cleaning tools like steel wool on the cabinets, which can remove the finish or stain and damage the wood .
Try mixing a weak solution of water and dish washing soap. Dip a soft cloth in the solution, wring it out and wipe the entire piece. You want a damp cloth, not a wet one. Don’t saturate the wood , and rinse your cloth often.
Start by wiping down your wood furniture with a barely damp microfiber cloth to remove dust and grime . You never want water to sit on the wood , so quickly wipe it down with another dry microfiber cloth. For regular dusting, a quick wipe-down with a microfiber cloth will do the trick.
The key to realizing Murphy ® Oil Soap safety, in items like Original Formula, is to understand it is a concentrate that has to be diluted with warm water. The recommended dilution is 1/4 cup per gallon of water, but shoot for 1/2 cup per gallon of water for heavier cleanings or sturdier woods like oak or rosewood.
2 cups white vinegar in a gallon of water, mop vigorously and let dry, repeat as needed. Will a couple of drops of dawn dish soap should do the trick.
Mix a 50/50 solution of vinegar and warm water and put into a spray bottle. Mist on cabinets , let sit for a minute or two and then wipe clean with a soft cloth. Add a few drops of liquid dishwashing detergent to the vinegar and water solution to clean extremely grimy cabinets .
Vinegar can clean all kinds of wood . Vinegar makes an excellent wood cleaner because it won’t damage wood finish or warp wood like other products do. Cleaning with vinegar is a green alternative to the sometimes toxic and expensive cleaners offered at the store.
How To Restore Old Wooden Furniture Old pieces of wood furniture can find new life with a little patience and a coat of oil paint or wood stain. All remaining paint must be removed from any old wooden furniture pieces before moving on to the finishing process. After removing all paint, smooth the surface of the piece using sand paper or steel wool.
Experts’ advice on the best way to clean : Use a fresh, slightly damp (not wet) cotton cloth to wipe daily spills off your table after a meal. Then buff with a dry cloth.
For restoring wood or the occasional heavy duty polishing: Mix 1 tablespoon vinegar with 3 tablespoons olive oil in a jar. Mix well. Dip a rag into the solution and then polish and restore your wood . This makes a very small patch so multiply it as needed.