Using one (thin) coat of primer + two (typically, maybe more) coats of paint you should have a long lasting, durable result!
Too much primer causes a different set of problems. Too many layers or an excessively thick layer increases the risk of the primer cracking, crazing, or chipping. It also takes longer to dry, slowing down your redecorating work. In the worst case scenario, it can damage drywall by causing it to bubble and peel.
WHAT TO DO Use your screwdriver to remove drawers and hardware. Sand the surface. After sanding, wipe down the surface with a damp cloth to remove any dust or residue. Apply a primer . Allow 2 hours for the primer to dry. Apply your paint exactly the same way you applied your primer .
Sanding after applying primer should help keep your surface as smooth and flat as possible, eliminating brush marks, or extra little globs. Also when painting, like others have pointed out, can raise little fibers from the drywall, going over the surface with a sheet of sandpaper can help get rid of those lose fibers.
The darker colour tends to ‘ghost’ through the new paint no matter how many coats you apply, so you will need to use a primer . If you are painting bare, untreated wood , the answer is definitely yes, you will need to prime the surface first.
In most cases, latex primers don’t take more than an hour to dry out. However, you should wait three to four hours before applying a layer of paint . On the other hand, an oil-based primer will need a longer time to dry out. You should give it 24 hours to make sure that it’s completely ready for another coat.
Most latex primers dry to the touch within 30 minutes to 1 hour. But do not paint the wall until the primer dries thoroughly, which can take up to 3 hours. High humidity and cool temperatures prolongs drying times.
For furniture it’s best to use a satin or semigloss finish in either a latex or an oil-based paint. Never leave primer unpainted. If you choose a latex paint, a latex primer is an excellent choice for most uses.
Actually, sanding between coats of primer is pointless. Once primer is dry, you should sand the primer before moving on to the basecoat color. Sanding between coats of primer will just extend how long it takes to complete the phase, while sanding at the end of the primer step yields the same results.
The primer coat doesn’t have to be perfect , but it should cover the surface (no bare spots) and it shouldn’t be so blotchy that you get drips or visible unevenness. You need to prime the surface thoroughly. The purpose of the primer is so give the surface uniform absorbtion properties.
Prime the cabinet doors. Only one coat of primer should do the trick, unless your cabinets are really dark, then I would recommend following up with one more coat of primer when that first coat is dry before moving on.
Can you paint over varnished wood without sanding ? Yes. There are a few ways to do this, but we choose to use an oil based primer to prepare our varnished wood for new paint . The oil based primer will stick to varnished or sealed wood .
Here are 5 Ways To Paint Furniture Without Sanding : USE A MINERAL PAINT . Mineral paint is very similar to chalk style paints in that no prep or prime is required. USE MILK PAINT + BONDING AGENT. As I already mentioned, the antique desk in this post was not prep- sanded . USE A BONDING PRIMER . USE A LIQUID SANDER /DEGLOSSER.
one to three hours