Common laundry bleach or chlorine will effectively remove stain or dye color from wood , but will not affect the wood’s natural color. Combined, they cause a chemical reaction that creates bleach that will blanch the stain color and can also alter the color of the wood itself.
Bleach literally bleaches the wood , resulting in a lightening of wood’s natural coloration. This bleaching effect may provide initially pleasing results, but over a period of several months the wood begins to take on a lighter appearance. The natural pH of wood is just slightly acidic, and bleach is a basic solution.
The only effective way to lighten the color of wood after it has been stripped of all surface coatings is to use a wood bleach. Sanding does help to lighten wood in many cases, but this only applies to surface soil or grime, and even then only if the discoloration has not penetrated very deeply.
On soft wood , you ‘ll see results very quickly; on hard woods the bleaching takes longer. Let the acid work for about 20 minutes, then wipe it off with a damp cloth. If the surface isn’t fully or evenly bleached, reapply the acid as necessary. On hard woods, complete bleaching may take up to an hour.
You literally just take a rag, pour bleach on it and wipe onto the wood evenly; apply it just like you would when wiping down a counter – not heavy, not too light. Let the bleach sit on the wood until it feels dry to touch. REPEAT as many times as you want. Each time the wood will look lighter.
Hydrogen Peroxide also has a bleaching effect on wood . However, you don’t need to worry because unless you apply an unnecessarily powerful hydrogen – peroxide formula or you have really dark hardwood floor, hydrogen peroxide won’t affect the color of your floor. It won’t whiten it.
Chlorine bleach is caustic and extremely harmful to wood and many other surfaces. If bleach is used on wood , it will weaken the wood by breaking down its fibers.
The short answer is no. It’s not safe to clean hardwood floors with bleach because bleach can break down the wood’s finish and seep into the porous fibers causing discoloration and weakening the structure of the floorboards.
Note that bleach should not be used to kill mold found on wood . While bleach is very effective for killing mold on non-porous surfaces, it doesn’t work well when it comes to wood . This is because the chlorine in bleach can ‘t penetrate wood , so only the water portion of the bleach gets absorbed.
If you try to apply a light -colored stain on top of an existing dark finish, you will not notice much difference. To completely alter the color of the wood’s finish, remove the existing paint using an oil based solvent. Once you have removed the original finish from the wood , you can add a lighter color stain.
Some homeowners with dark wood furniture are choosing to paint it white to update its look and increase its longevity. Painting furniture is not difficult, but can take several days to do properly. A primer is also a necessity for painting dark furniture white .
Step 1 – Prep the Area Before Applying Chalk Paint . Step 2 – Clean the Furniture Surface. Step 3 – Test For Chalk Paint Bleed Through. Step 4 – Chalk Paint Over the Stain and Polyurethane. Step 5 – Let Chalk Paint Dry and Re-Coat. Step 6 – Sand Chalk Paint off of Hardware. Step 6 – Touch Up Areas of Chalk Paint .
Generally, Clorox® Regular Bleach 2 is suitable for disinfecting floors made of hard surfaces like ceramic tile, vinyl, and linoleum—not marble or other porous surfaces that aren’t safe for bleach . Wood is porous, and generally we only recommend bleaching exterior finished wood surfaces, not interior hardwood floors .
Hydrogen peroxide works to clean and sanitize wood . When used on wood floors, it removes surface dirt as well as stubborn stains. Hydrogen peroxide , however, pulls out the staining compounds from the wood while drying it in the process. Bleaching is another effect of hydrogen peroxide on wood .
Mix about a quart of chlorine bleach ( Clorox , Purex, etc.) to each gallon of water. Use a syntheticbristle brush and scrub the surface with the bleach mixture. Be sure to wear goggles—it’s easy to splash. Reapply the bleach if necessary in order to keep the surface wet for about 15 minutes.