Remove the hardware from the water one piece at a time and scrub it with a soft toothbrush. If the hardware is tarnished , spray the toothbrush with white vinegar and sprinkle the bristles with table salt before scrubbing. Rinse the hardware and buff it with a chamois cloth to restore shine.
To use, simply dip the end of a soft, clean cloth into your vinegar and rub the brass until it shines. You can also add 1 teaspoon salt to 1/4 cup of vinegar to boost the polishing effects. But make sure the salt is not too coarse, as it can scratch the brass .
How You Should Clean Stainless Steel Door Knobs . The easiest and safest way to clean your stainless steel door hardware is to use a soapy, damp soft cloth and then rinse with clean water. However, for stuck on gunk or stubborn residue, you can create a mixture of equal parts of olive oil and vinegar.
All you need to do is coat the gold and brass lamp with a layer of WD – 40 , which is a great to clean brass and let it sit for about 15-30 minutes. Take a clean cloth and rub the lamp in circular motions drying and buffing it up. It will clean and polish brass and gold lamp and will make it shine bright as good as new.
How to use the baking soda method Boil some water in a small pot. Once the water is boiling, sprinkle in some baking soda. Use metal tongs to dip your drawer pulls into the bubbly baking soda water. Hold the drawer pulls in the water for a minute or so and watch the rust and dirt float away (so satisfying!)
Take a bowl and measure in one tablespoon of flour, one of salt, and one of vinegar. Mix it thoroughly until it turns to a paste, and then rub it on to the surface of the brass or copper. We now sell the microfibre cloths which you use. Leave it for a couple of minutes, and then wash it off with hot soapy water.
Avoid soaking, simply wash with warm, soapy water, and rinse thoroughly. Never use a dishwasher. Dry thoroughly with a soft lint-free cloth. Store in tarnish inhibiting bags in a dry place.
Lemon and Baking Soda Polish Combine the juice of half a lemon with a teaspoon of baking soda and stir until it becomes a paste. Apply the paste with a soft cloth. If the tarnish is heavy, let the piece sit with the paste on it for 30 minutes. Rinse with warm water and dry.
Instead of making a paste, dip a dry cloth in vinegar and then dip in a bowl of salt. Rub the cloth all over your tarnished brass , using a little elbow grease on the particularly distressed areas. This stuff is great for doorknobs or items that get a little more wear and tear than, say, your grandma’s brooch.
Mix baking soda and white vinegar together to create a paste. It’ll fizz for a minute, but will quickly settle down. Then, rub the paste into the copper or brass object that you wish to clean , using your hands or an old toothbrush. Let it sit for 30 minutes or so.
Vinegar . Dissolve 1 teaspoon salt in 1/2 cup vinegar and add enough flour to make a paste. Rub onto the brass and leave for 10 minutes, then rinse and buff dry.
Soap, detergent or dilute (1%) ammonia solution in warm clean water . Apply with a clean sponge, soft cloth or soft-fibre brush then rinse in clean water and dry. Satisfactory on most surfaces. Detergent and warm water , alternatively, hydrocarbon solvent.
There are three ways to clean your nickel door furniture: Use your breath and buff with a soft cloth. Use soap and water, wipe over thoroughly, let it dry off and buff with a soft cloth. Invest in a product called Autosol.
How to Clean Stainless Steel Handles It is recommended to use filtered clean water in a bucket with a small dose of liquid detergent and a cleaning sponge. Mix the detergent through the water and dampen the cleaning sponge. Squeeze any excess water, wipe over and clean your handles with the damp, soapy sponge.