To remove grime, use a mild oil-base soap, such as Murphy Oil Soap, mixed with warm water . For a DIY cleaning solution, mix 1/4-cup ammonia, 2 tablespoons white vinegar , and 1 quart of warm water . Commercial wood cleaners are also effective for cleaning patio furniture, but be sure to read directions carefully.
A mild bleach solution removes stubborn mildew from outdoor furniture fabrics . Mix 1 tablespoon of bleach into a pint of warm water in a bucket. Dip a sponge into the solution and soak the mildewed areas, leaving the furniture to sit in the sun on a nonhumid day for 15 minutes.
As long as the cushion fits in your washer and allows room to agitate and spin out, there is no problem with washing a patio chair cushion in a washing machine. You may want to avoid bleach, but you can add a cup or two of white vinegar for extra cleaning and to kill mold and mildew.
Light cleaning of wood outdoor furniture is best done with a cloth moistened with water or a mild soapy solution. For deeper cleaning at the start and finish of each season or in the instance of tougher stains or mold, you can scrub with a soft brush and a mix of water and dishwasher detergent or oxygen bleach.
A relatively easy way to remove lichen is to use vinegar . Scrape away the lichen patches using a stiff brush. Afterwards, fill a bucket with distilled white vinegar , the acetic acid strength of which should be no more than 5%, and then add 30 ml of washing-up liquid before pouring the mixture into a spray bottle.
You’ll need a sponge soaked in detergent or your favorite all-purpose nonabrasive cleaner. Just scrub, rinse and dry with a soft cloth. To maintain the shine on plastic, resin and metal furniture , give it a good waxing. Remove the cushions first, if possible, because the wax can stain.
Vinegar truly is better than bleach at killing mold . In most cases, “a background level of mold spores will remain” after the application of bleach . “ Bleach only kills surface mold , not the membrane underneath,” according to ServiceMaster. “That means the mold will grow back.
If the article cannot be bleached , try removing the mold with lemon juice or white vinegar. Soak a cotton pad in lemon juice or vinegar and place it on the stain. Allow it to soak for several minutes. Remove the pad and sprinkle the area with some salt to further boost the effect of the acid.
White vinegar is a safe, natural and very effective mold and mildew killer. You can either soak a sponge in full-strength vinegar , or fill a spray bottle and thoroughly soak affected areas. Let it sit for a few hours, and then scrub it with a brush or a coarse scrubbing sponge.
STEP 1: Remove the cases from patio cushions and machine- wash when possible. STEP 2: Vacuum the patio cushions . STEP 3: Hand- wash and soak the cushions in a solution of water and dish soap. STEP 4: Rinse with a garden hose. STEP 5: Towel-dry the patio cushions as best possible, then leave out to air-dry.
Refresh faded cushions with—wait for it spray paint. Yes! You absolutely can. If you just can’t find new cushions you like, or if you don’t want to invest in new ones, you can extend the life of your current fabric with nothing more than regular spray paint right off the rack of your local hardware store.
For best results, the wood you are staining should be free of dirt and mildew. Apply deck wash (or a homemade water-and-bleach solution) with a pump sprayer to clean the surface. Scrub any spots that are especially dirty, rinsing them with water as you go. Allow at least 24 hours for the wood to dry completely.