French Polishing and Bespoke Furniture
For furniture it’s best to use a satin or semigloss finish in either a latex or an oil-based paint . Never leave primer unpainted. If you choose a latex paint , a latex primer is an excellent choice for most uses. It goes on easily and blocks most stains, but it doesn’t have the odor of an oil-based primer.
Paint with an oil-based primer using a small foam paint roller for priming the large, flat sides of your furniture piece. Use a paintbrush to prime the small areas. Once the primer is dry you can paint the large, flat surfaces with a small, foam roller. Use a paintbrush to paint the smaller areas.
Here are 5 Ways To Paint Furniture Without Sanding : USE A MINERAL PAINT . Mineral paint is very similar to chalk style paints in that no prep or prime is required. USE MILK PAINT + BONDING AGENT. As I already mentioned, the antique desk in this post was not prep- sanded . USE A BONDING PRIMER. USE A LIQUID SANDER /DEGLOSSER.
to paint your bedroom furniture {or any piece of furniture } so it will not chip, you are going to want to prime, paint , and seal the whole thing. this is not hard. water-based primer. water-based paint {in whatever color you choose}
white
HOW TO PAINT FURNITURE Step 1: Prep, prep, prep! First, prep your piece of furniture . Step 2: Sand. Next, sand your furniture and get all of the glossy finish off so that the paint will have a good surface to “grab” onto. Step 3: Prime. After your furniture is dry and dust-free, paint on some primer. Step 4: Sand Again. Step 5: Paint .
When you paint furniture white , even with a primer you will still need a minimum of two coats of white paint . There is less pigment in white furniture paint making it sometimes seem as if it’s see through. Don’t get discouraged, with primer and two coats of paint your piece will start to look beautiful.
Some homeowners with dark wood furniture are choosing to paint it white to update its look and increase its longevity. Painting furniture is not difficult, but can take several days to do properly. A primer is also a necessity for painting dark furniture white .
These tips will help you minimize your brush strokes and remove distractions from the smooth, professional finish of your piece. Use the Right Brush for your Paint . Use Good Brush Technique. Paint in the Same Direction as the Wood Grain. Lightly sand in between each coat of paint and after final coat.
How to Paint Furniture Like a Pro Use the Right Tools. To avoid visible brush strokes in your paint job, you need to use the right tools. Know What Not to Paint . Lightly Sand Before You Begin. Use Primer. Water Down Your Paint . Lightly Sand In Between Coats. Finish with Polycrylic. Put Furniture on Blocks.
When You Can Skip Sanding , Deglossing and Priming If the finish on your furniture isn’t damaged or chipping, it’s flat not shiny and you aren’t painting it a drastically different color, then you may be able to just go ahead and start painting . Before painting though, do make sure the piece is clean.
Each piece of furniture is different and requires a different plan. I use a brush most of the time, but a roller comes in pretty handy and speeds up the process of painting large pieces of furniture .
No, you do not. But you do need to properly prep the surface first. Wiping it down with a clean soapy rag is always advised, and you may want to use a deglosser. I choose to use an oil-based paint instead which will adhere to a varnished surface and is a great way to prep for a final coat of paint .