Lightly sand the object you want to distress . If the object already has a finish ( previously painted or varnished ), sand all surfaces well. After the sanding, wipe the piece with a tack cloth.
softwood & hardwood boards Step 1: Choose the Wood ” Step 2: Rough Up the Wood ” Step 3: Stab and Scour the Wood ” Step 4: Scrub the Surface with a Wire Brush ” Step 5: Sand Down the Sharp Edges ” Step 6: Create a Vinegar Treatment ” Step 7: Apply the Treatment to the Wood ” Step 8: Apply a Coat of Light Paint ”
The shabby chic look is best achieved with wooden furniture and a couple of coats of Rust -Oleum Chalky Finish furniture paint.
I used a variety of 100 – 220 grit sandpaper to do my distressing , and it helped to have a hand sander or sanding sponge to wrap the sandpaper around. It gave me a little more to grip. The general rule when distressing is to sand on sections that would naturally receive wear and tear over time: corners.
Prepare Your Space. Start by laying down drop cloths and preparing the area. Sand and Clean the Piece. Sand the surface of the piece. Paint the Piece. Apply Wax and Top Layer of Paint (Optional) Distress the Piece with Sandpaper and Steel Wool. Apply a Stain (Optional) Protect the Finished Piece with Polyurethane.
Shabby chic items are often heavily painted through the years, with many layers showing through obviously time-worn areas. The style is imitated in faux painting using glaze or by painting then rubbing and sanding away the top coat to show the wood or base coats, known as “distressing” the finish of the furniture .
Here are 5 Ways To Paint Furniture Without Sanding : USE A MINERAL PAINT. Mineral paint is very similar to chalk style paints in that no prep or prime is required. USE MILK PAINT + BONDING AGENT. As I already mentioned, the antique desk in this post was not prep- sanded . USE A BONDING PRIMER. USE A LIQUID SANDER /DEGLOSSER.