Prepare Your Space. Start by laying down drop cloths and preparing the area. Sand and Clean the Piece. Sand the surface of the piece. Paint the Piece. Apply Wax and Top Layer of Paint (Optional) Distress the Piece with Sandpaper and Steel Wool. Apply a Stain (Optional) Protect the Finished Piece with Polyurethane.
Here are 5 Ways To Paint Furniture Without Sanding : USE A MINERAL PAINT. Mineral paint is very similar to chalk style paints in that no prep or prime is required. USE MILK PAINT + BONDING AGENT. As I already mentioned, the antique desk in this post was not prep- sanded . USE A BONDING PRIMER. USE A LIQUID SANDER /DEGLOSSER.
To age new wood to a natural silvery gray, to grey -brown or black patina (depending on the wood ), let a small piece of steel wool (or a few non-galvanized nails) sit overnight in ordinary white vinegar, then dilute the vinegar solution 1 to 1 with water. (If you used 1/4 cup of vinegar, add 1/4 cup of water.)
Yes you can distress furniture paint with regular flat latex paint . It’s a budget friendly alternative. A flat latex paint is easy to sand and you can use my vinegar and water distressing technique . You can layer two colors, and create lots of the looks if you use flat latex paint .
You CAN use regular paint but it will come off easier than spray paint. Use an acrylic or latex paint in a lighter color and paint two coats. Wait for the paint to dry for one hour per coat. Truly old furniture that has the look of shabby chic often has layers of paint where some of the layers underneath show through.
If it’s varnished, use sandpaper or a good quality paint and varnish remover. Apply a coat of water-based acrylic primer – This simply gives your furniture a smoother finish, making it easier to work on. Because it’s a shabby chic project, you don’t need to be neat. Even if you’re rubbish at painting , you’ll be fine.
When You Can Skip Sanding , Deglossing and Priming If the finish on your furniture isn’t damaged or chipping, it’s flat not shiny and you aren’t painting it a drastically different color, then you may be able to just go ahead and start painting . Before painting though, do make sure the piece is clean.
Can you paint over varnished wood without sanding ? Yes. There are a few ways to do this, but we choose to use an oil based primer to prepare our varnished wood for new paint . The oil based primer will stick to varnished or sealed wood .
Before applying paint to whitewashed furniture, all you need to do is sand the surface slightly to create a rough texture for the paint to adhere to. The whitewash will not be visible underneath full coats of paint.