Stripping is Faster and Often Safer. It’s almost always better to strip than to sand . To begin with, except in cases where the old finish is flaking off, it’s a lot more work to sand than to strip using a paint-and-varnish remover.
Can you paint over varnished wood without sanding ? Yes. There are a few ways to do this, but we choose to use an oil based primer to prepare our varnished wood for new paint . The oil based primer will stick to varnished or sealed wood .
Here are 5 Ways To Paint Furniture Without Sanding : USE A MINERAL PAINT . Mineral paint is very similar to chalk style paints in that no prep or prime is required. USE MILK PAINT + BONDING AGENT. As I already mentioned, the antique desk in this post was not prep- sanded . USE A BONDING PRIMER. USE A LIQUID SANDER /DEGLOSSER.
Easily remove past-its-prime paint with these high-performing paint strippers . BEST OVERALL: Citri-Strip Paint and Varnish Stripping Gel . BEST FOR HEAVY DUTY: Dumond Peel Away 1 Heavy-Duty Paint Remover. BEST ECO PICK: Smart Strip Advanced Paint Remover.
When You Can Skip Sanding , Deglossing and Priming If the finish on your furniture isn’t damaged or chipping, it’s flat not shiny and you aren’t painting it a drastically different color, then you may be able to just go ahead and start painting . Before painting though, do make sure the piece is clean.
If you want to paint over gloss with gloss there’s no need to use it. Just give the surface a clean and sand before painting . If you are painting over gloss woodwork with a satin or eggshell finish, you also won’t need to use this primer. Lightly sanding and cleaning will help the new paint adhere.
A lot of folks make the mistake of sanding to either too fine of a grit or not fine enough before applying stain . Too fine and the wood won’t be able to accept the stain . Too rough and the wood will be very dark almost to the point of being black.
Strip and Refinish Furniture Step 1: Choose a Work Area. Work in a well-ventilated area such as your open garage or on an outdoor deck or patio. Step 2: Strip Away Old Finish. Wood begins to turn dark, dull and lifeless when it ages. Step 3: Sand It. Step 4: Apply Sanding Sealer. Step 5: Stain It. Step 6: Apply Sealant.
Depending on the type of table top and finish you’re working with, you could get away with lightly sanding or repainting the table to give it a new look. We successfully stripped the varnish and stain and refinished the table top over a few days.
Deglosser focuses on dulling an old finish. If the older finish is irregular, rough, pitted or scratched, deglosser won’t smooth it. Only sandpaper can repair bad surfaces, smoothing them with its abrasive qualities. If your previous finish needs smoothing in any way, sanding is the only way to accomplish it.
You can paint over stained wood trim, cabinets, doors, furniture, or most any other stained wood , however you must prepare the stained wood before painting so the paint will stick.