Restore the Color with Gel Stain It’s amazing what a coat of gel stain can do to restore a tired-looking piece of furniture . The cool part is that you don’t need to strip the old finish for this to work.
It’s almost always better to strip than to sand . To begin with, except in cases where the old finish is flaking off, it’s a lot more work to sand than to strip using a paint-and-varnish remover. Stripping is messy, which is probably the reason many people chose to sand instead.
Strip and Refinish Furniture Step 1: Choose a Work Area. Work in a well-ventilated area such as your open garage or on an outdoor deck or patio. Step 2: Strip Away Old Finish. Wood begins to turn dark, dull and lifeless when it ages. Step 3: Sand It. Step 4: Apply Sanding Sealer. Step 5: Stain It. Step 6: Apply Sealant.
How To Revive Old Wood Sand Lightly. Using something like 120-grit sandpaper make sure there isn’t any dirt or loose wood fibers lingering. Apply Oil. Mix up a 50/50 solution of boiled linseed oil and turpentine. Prime & Paint. Using a good oil-based primer, cover the bare wood after the oil is cured.
Can you paint over varnished wood without sanding ? Yes. There are a few ways to do this, but we choose to use an oil based primer to prepare our varnished wood for new paint . The oil based primer will stick to varnished or sealed wood .
To remove it, dampen a soft, fine-grade steel-wool pad with more paint stripper and rub it against the wood , following the wood grain, then wipe off the softened stain with a rag.
One of the most common ways to clean down wood after it has been stripped is to employ a combination of vinegar and water. Mix these two liquids together in equal proportions. Immerse a soft rag within this solution and gently wipe any wood that has been subject to the stripping agent.
The best paint stripper Best Overall: Citri-Strip Paint and Varnish Stripping Gel . Most Eco Friendly: Dumond Smart Strip Advanced Paint Remover. Fastest Working: Sunnyside 2-Minute Advanced Paint Remover. Most Family Friendly: MAX Strip Paint & Varnish Stripper. Most Heavy Duty: Dumond Peel Away 1 Heavy-Duty Paint Remover.
To remove those last bits of finish , palm sand with medium sandpaper (150 grit) until you see the bare wood . Then switch to fine sandpaper (200+ grit) until the entire piece is uniform. Wipe down the whole surface with a tack cloth to remove any dust from sanding.
Using vinegar and water as a homemade hardwood floor cleaning solution can have a negative effect on your hardwood floor. Since vinegar is an acid, it will actually break down the finish on the surface of your floor, and over time it will reduce the shine and leave a dull appearance.
You mix together half a cup of olive oil and half a cup of white vinegar . You can leave it in a bowl and just dip a soft cloth into it, or you can put it in a spray bottle and shake it up.