Stripping is Faster and Often Safer. It’s almost always better to strip than to sand . To begin with, except in cases where the old finish is flaking off, it’s a lot more work to sand than to strip using a paint-and-varnish remover.
Restore the Color with Gel Stain It’s amazing what a coat of gel stain can do to restore a tired-looking piece of furniture . The cool part is that you don’t need to strip the old finish for this to work.
Minwax® PolyShades® is an easy way to change the color of your currently stained or polyurethane finished wood . There’s no stripping or heavy sanding necessary to remove the old finish!
Laquer. You don’t need to remove all of the old stain to apply darker stain . But you do need to remove all of the lacquer, varnish or anything that will prevent new stain from absorbing into the wood . Your sanding block will initially glide over the old lacquer before it begins to cut into it and remove it.
The best paint stripper Best Overall: Citri-Strip Paint and Varnish Stripping Gel. Most Eco Friendly: Dumond Smart Strip Advanced Paint Remover. Fastest Working: Sunnyside 2-Minute Advanced Paint Remover. Most Family Friendly: MAX Strip Paint & Varnish Stripper. Most Heavy Duty: Dumond Peel Away 1 Heavy-Duty Paint Remover.
How To Revive Old Wood Sand Lightly. Using something like 120-grit sandpaper make sure there isn’t any dirt or loose wood fibers lingering. Apply Oil. Mix up a 50/50 solution of boiled linseed oil and turpentine. Prime & Paint. Using a good oil-based primer, cover the bare wood after the oil is cured.
Here are 5 Ways To Paint Furniture Without Sanding : USE A MINERAL PAINT. Mineral paint is very similar to chalk style paints in that no prep or prime is required. USE MILK PAINT + BONDING AGENT. As I already mentioned, the antique desk in this post was not prep- sanded . USE A BONDING PRIMER. USE A LIQUID SANDER /DEGLOSSER.
Steps to Take: Wear hand gloves for protection. Pour some linseed oil onto the wood . You may use a rag to rub it back and forth. Make sure you spread the oil across the whole surface. Let it dry for about 15-20 minutes to be effective. Wait for the boiled linseed oil to soak in.
1. Staining over stain is easy and works beautifully if your applying a dark stain over a lighter stain on raw wood. 2. You can mix 2 or more stains together to make DIY custom stains .
You can paint over stained wood trim, cabinets, doors, furniture, or most any other stained wood , however you must prepare the stained wood before painting so the paint will stick.
You can use a stiff-bristled scrub brush to remove varnish from fancy, curved details. Some of the stain may linger after scraping. To remove it, dampen a soft, fine-grade steel-wool pad with more paint stripper and rub it against the wood , following the wood grain, then wipe off the softened stain with a rag.
Using vinegar and water as a homemade hardwood floor cleaning solution can have a negative effect on your hardwood floor. Since vinegar is an acid, it will actually break down the finish on the surface of your floor, and over time it will reduce the shine and leave a dull appearance.