To darken the wood without altering it drastically, choose a darker version of the existing color; for example, add depth to light walnut with polyurethane tinted with dark walnut. Dip a tapered paintbrush in the polyurethane and apply a thin coat on the furniture until the brush runs dry.
Staining over stain is easy and works beautifully if your applying a dark stain over a lighter stain on raw wood. 2. You can mix 2 or more stains together to make DIY custom stains . 3.
If the wood you are refinishing already has a clear protective finish , you need to test for adhesion before applying PolyShades®. A few simple rules to keep in mind: PolyShades® will work over stained wood (meaning it does not have a clear protective finish ) or wood topcoated with a polyurethane-based finish .
If the wood is too dark, soak a clean cloth in turpentine or mineral spirits and rub the wood firmly and evenly along the grain. This will lighten the stain but not remove it.
Yes, it would be best if you stripped, remove the old stain before you restain . If the stain on the surface of your deck is old , worn out and peeling, the first thing you should do in your quest to renew the deck is to remove all the old stain . Solid deck stains offer much-needed protection to the wood.
There are several ways to determine whether a surface is dry : OIL BASED products are dry if they are no longer tacky and do not emit a smell. WATER BASED products are try if they no longer feel cool to the touch and a powder will form with light sanding.
Laquer. You don’t need to remove all of the old stain to apply darker stain . But you do need to remove all of the lacquer, varnish or anything that will prevent new stain from absorbing into the wood . Your sanding block will initially glide over the old lacquer before it begins to cut into it and remove it.
If you try to apply a light – colored stain on top of an existing dark finish, you will not notice much difference. To completely alter the color of the wood’s finish, remove the existing paint using an oil based solvent. Once you have removed the original finish from the wood, you can add a lighter color stain .
Step 1: Clean the Surface. Use gentle soap and water to remove dirt and oils from the table’s existing finish. Step 2: Apply Stripper. If the table is painted or varnished, you’ll need to strip the surface. Step 3: Clean With Mineral Spirits. Step 4: Sand Table Surface. Step 5: Apply Stain. Step 6: Apply Finish.
For a deep stain , leave the stain on the wood for 5 to 10 minutes before wiping it off with a cloth. For a lighter stain , wipe the surface immediately after application. Allow the stain to dry for 24 hours before applying the topcoat of your choice.
Step 1: Lightly Hand Sand. Using a light grit sanding block, lightly hand sand the entire surface of the wood piece that you would like to darken . Step 2: Clean Wood . Clean your entire piece thoroughly using a mild cleanser. Step 3: Apply Dark Gel Stain . Apply the gel stain using a chip brush. Step 4: Seal.
Coating Selection Polyurethane stain blends are available in the most-common wood stain colors. They are applied over the old finish, and aren’t designed to soak in, so you don’t have to sand or strip off the polyurethane. Another option is oil-based paint, but its opacity can mask the wood grain.
Combine some steel wool and white vinegar in a mason jar and allow to sit for a few days. The vinegar and steel wool will have a chemical reaction. When applied to the tea treated wood , the vinegar will immediately start to oxidize the tannins in the wood and turn the wood dark .