You can use craft paints, leftover latex paint , chalk paint, pretty much anything will work. Because you are only adding a very thin layer of paint at a time, there’s a good chance you are going to want to do a few coats to get good coverage, especially if you are painting with white paint over wood.
For the best results, use high-gloss or semigloss spray paint or enamel. Make sure the stencil paint is compatible with the finish. Surfaces to be stenciled must be clean; remove all wax and dirt. If you’re decorating a newly varnished piece of furniture , work while the varnish is still slightly tacky.
Take your Mod Podge and just rub is over the stencil in a light coat. I just use my finger for this, but you can use a foam brush if you’d like. This seals the edges of the stencil so that the paint won’t bleed under it. You only need to do one coat of the Mod Podge.
Milk paint , which you can purchase as a powder or premixed, or even whip it up yourself at home, is a nontoxic and biodegradable paint option that’s great for use on wood furniture —and if you mix it with an equal part of bonding agent, you don’t need to sand the piece before beginning.
You can cut stencils from frisket paper which can be found at art supply stores. Cut the letters with an exacto knife and then stick it on the wood . Frisket paper has an adhesive back.” – Karen J. “I used to play around with printing the letters and then trace the lines with carbon paper and paint them in.
Let the paint dry for a bit before you remove the stencil . This will help ensure that you don’t accidentally smear or smudge the paint . Use a good brush and stencil cleaner to clean and preserve your brush and stencil for future use.
Step 1: Chalk Paint ® is GREAT for furniture stenciling because it covers quickly and dries fast. You can pour out a small amount into a small plastic cup to keep the paint from drying out in the can.
Natural Causes of Bleed Through What it actually is, are the tannins and resins of the wood trying to escape. Nature is a wonderful thing, and it will almost always win! There is a way to prevent this from happening, it is a VERY important step to take during the PREP stage of painting .
To avoid bleeding into the wood grain when writing on raw wood with a felt tipped pen, first sand the area, then apply a coat of Elmer’s Glue. It goes on white, and dries clear. If it is too thick, thin a little with water. A second coat will make it smoother to write on.
As it turns out, not only can you spray paint wood without sanding – you can also spray paint pressed wood /particle board (which some parts of this desk were) and even that papery cardboard panel on the back. All of it you guys. Just spray paint ALL of it. Then let it dry and do it again.
When You Can Skip Sanding , Deglossing and Priming If the finish on your furniture isn’t damaged or chipping, it’s flat not shiny and you aren’t painting it a drastically different color, then you may be able to just go ahead and start painting . Before painting though, do make sure the piece is clean.
You can paint over stained wood trim, cabinets, doors, furniture, or most any other stained wood , however you must prepare the stained wood before painting so the paint will stick.