Start by wiping down your wood furniture with a barely damp microfiber cloth to remove dust and grime . You never want water to sit on the wood , so quickly wipe it down with another dry microfiber cloth. For regular dusting, a quick wipe-down with a microfiber cloth will do the trick.
Sealed wood and other furniture : Mix water and a little mild liquid dish detergent and spray onto furniture , then wipe with a damp cloth and dry with another clean , lint-free cloth. Dust oiled or untreated wood paneling with a vacuum cleaner’s soft brush attachment or a ceiling brush.
General Care. To maintain the finish, mild dish soap or a damp cloth is recommended for cleaning up after spills, just as you would clean woodwork. Cleaners such as Pledge and Murphy’s Oil Soap are not recommended because they leave a dull residue on the finish.
Mix equal parts vinegar and water; dip a soft cloth in the mixture and wring out really well or use the solution in a spray bottle. Wipe the wood in the direction of the grain, re-wetting and wringing your cloth often.
Use a mix of equal parts distilled white vinegar and extra-virgin olive oil. Use a soft cloth to rub the mixture with the wood’s grain and then wipe off with a clean cloth.
Vinegar can clean all kinds of wood . Vinegar makes an excellent wood cleaner because it won’t damage wood finish or warp wood like other products do . Cleaning with vinegar is a green alternative to the sometimes toxic and expensive cleaners offered at the store.
A homemade cleaner disinfects well and is safe for any type of wood surface or wood finish . Fill a spray bottle with 2 cups water, 1 cup white vinegar and about five drops dish soap if the wood is soiled. Spray the solution onto the wood furniture and wipe off with a damp cleaning rag.
Vinegar and Soap Solution: Mix one cup warm water, 1/4 cup of white vinegar, and a tablespoon of Castile soap. If you don’t have Castile soap, use mild dish detergent. Put the mixture inside a spray bottle or a bowl. Spray or brush on the solution to any stained areas.
Clorox Disinfectant Wipes are specially formulated to be safe on common finished wood surfaces like tables , cabinets and floors. Clorox Disinfectant Wipes are not recommended on unpainted, untreated, or unfinished porous wood surfaces.
Other Tips For Cleaning & Protecting a Wood Table Dust your wood table often. Small particles of dust may seem harmless, but enough buildup can scratch the wood’s finish. Use vinegar and oil to get water rings out of your wooden table . Keep it away from the radiator. Watch humidity levels. Make your wood table shine.
Every six weeks is often enough to use polish , they agree. Furniture polish contains water, while waxes contain naphtha, and both can raise a wood veneer over time, Hodges said. “ You want a nice, hand-rubbed look in furniture , but furniture can be marred when you rub it, even with some kinds of rags,” he said.
When mature woodwork gets sticky , it’s a sign that the finish has gotten dirty, coated with oils or wax, or that it’s breaking down. A surface that’s sticky or gummy is often the result of dirt and grime accumulation—especially when it’s frequently touched, like a handrail.
Pledge , which contains silicone, will not harm or otherwise damage wood or clear coats. However, it does present real problems if you ever need to have touch up repairs or refinishing done to the item. Silicone creates a very slick surface tension, which repels any product applied over it.
Routine Cleaning and First Aid DUST CAREFULLY with a soft cloth, following the grain pattern of the wood . DUST OFTEN to remove everyday abrasive particles from wood surfaces. CONSIDER CLEANING with mild non-alkaline soap and water. DON’T WAX or use any polish that contains any silicones!